Electric Foundation Embedder EEM-AVV 30 W (with crocodile clips)
Reinforced electric foundation embedder "PAVIK 30" 220V /15V 30W is used for embedding beeswax foundation into bee frames.
Foundation embedder 220V / 30W
Operating procedure: Connect the device to the 220 V mains supply and switch on the button (the button should light up). Attach the lead with the crocodile clip to one end of the wire stretched across the frame. Attach the other lead with the other crocodile clip to the opposite end of the wire. Apply wax to the wire to check that it is heating. Then place the beeswax foundation onto the frame with the heated wire. If the sheet of beeswax foundation is flat and the frame is wired correctly, the foundation will be embedded.
Dimensions (mm):
120x65x55
Weight: 658 g
Country of manufacture: Ukraine