5-Hole Beekeeping Frame Punch with Guide Mechanism (Two Handles) + Eyelets images
5-Hole Beekeeping Frame Punch with Guide Mechanism (Two Handles) + Eyelets
5-hole beekeeping frame punch with two levers. This machine is used both for punching holes and for fitting eyelets (3 mm x 6 mm) in hive frames. It has height, size and needle adjustment functions. 100 g of eyelets are included.
5-Hole Beekeeping Frame Punch with Guide Mechanism (Two Handles) + Eyelets
This machine is used both for punching holes and for fitting brass eyelets (3 mm x 6 mm) in hive frames. 100 g of eyelets are included with the punch. A special feature of this model is that holes can be punched at the same time as the eyelets are fitted.
Suitable for Langstroth (Ruta), Dadant frames and shallow super half-frames.
The base of the machine consists of two guide rails along which the needle bar moves. The needles on the bar are moved by two handles (levers) working synchronously. The levers rotate on bearings, making the punch easy and comfortable to use.
An adjustment bolt is fitted on the side of the machine, allowing the working surface to be set to the required size.
Height adjustment is carried out using 3 adjustment screws installed at the front of the needle bar.
This punch also allows the needles to be adjusted by up to 10 mm in length.
The punch does not have to be fixed permanently; it can be moved freely. However, if you wish to secure it in a fixed position, special mounting slots are provided in the base of the machine.
